Beckhoff EtherCAT IP Core for Altera FPGAs v3.0.10 Manual de usuario Pagina 68

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 141
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 67
Example Designs
III-56 Slave Controller IP Core for Altera FPGAs
6.4 Altera Cyclone IV DE2-115 with NIOS and RGMII
6.4.1 Configuration and resource consumption
Table 16: Resource consumption NIOS example design DE2-115 RGMII
Configuration
Resources
EP4CE115
Physical layer
2x RGMII,
MIIM, Link state and PHY
configuration through MI
Les
19,182
17 %
Internal Function
3x FMMU
4x SyncManager
1 KB RAM
Registers
9,106
8 %
Distributed clocks
32 bit,
2x Sync, 2x Latch
M9K
264
61 %
Feature details
AL Status Code register,
Extended Watchdog,
AL Event Mask register,
Watchdog counter, EPU
and PDI Error counter,
Lost Link Counter,
RUN_LED,
LED Test
PLLs
1
25 %
PDI
Avalon
32 bit
Multiplier
elements
0
0 %
6.4.2 Functionality
Configure ETHERNET0 and ETHERNET1 for RGMII mode by setting jumpers JP1 and JP2 to 1-2.
The DE2-115 example design with RGMII ports is equal to the DE2-115 example design with MII,
except for the PHY connection. Refer to DE2-115 example design with MII for more details.
6.4.3 Downloadable configuration file
An already synthesized time limited OpenCore Plus configuration file
DE2_115_EtherCAT_NIOS_RGMII_time_limited.sof
based on this digital I/O example design can be found in the
<IPInst_dir>\example_designs\DE2_115_NIOS_RGMII\
folder. After expiration of about 1 hour the design quits its operation unless the JTAG connection to
Quartus remains active. This file must only be used for evaluation purposes, any distribution is not
allowed.
Vista de pagina 67
1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 140 141

Comentarios a estos manuales

Sin comentarios