Beckhoff C1120 Manual de usuario descargar pdf (Pagina 22)

C1120 S5 to II/O-Lightbus Interface Beckhoff II/O-Lightbus System

Page 22 of 52 Version 2.1 Date 27.06.97

Online Menu

For transfer of setups from a PC to the C1120 interface and back, the online menu helps to

control communication actions, saving and printing of project setups:

If a communication timeout occurs during or at start of a transfer, first action to be taken

should be to check the RS232 interface cable and the serial interface parameters in the menu

"Program Parameters".

Function keys:

F1 HELP

displays help text.

F2 RESET C1120

Generates a software reset of the C1120 interface. The interface boots and runs

through following steps:

- self test of the C1120 interface,

- the configuration saved in the EEPROM memory is loaded and activated,

- the II/O-Lightbus ring is reset.

The status of the C1120 is displayed after completion of the reset in the status

line. This function can be activated only while the PLC is in STOP mode.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 51 52

Sin comentarios

Beckhoff C1120 Manual de usuario Pagina 22