Beckhoff CX9000 Manual de usuario descargar pdf (Pagina 54)

Appendix

52 Embedded PC

7. Finish Update

Update is now complete. Reconnect the CX90x0-System to the network. The CX-System can now be used as before.

NOTES on network configuration:

• Image server will listen in complete network to be contacted by CX9000

Two solutions to be sure that you just update your CX9000 device.... and not others in network !

1a.

provide a subnet (like a second network card in host PC)

1b.

connect host-pc and CX9000 directly without involving company network

The image server can be configured to let CX directly request image from specific IP address.

Step 1: connect CX9000 with PC, get IP address of PC like 192.16.18.123

Step 2: edit the image-server-batch-file and add the IP address to the commandline. (Sample : Tools\CxImageSrv

Images\HMI 192.16.18.123 )

Step 3: proceed with booting CX9000 in boot strap mode. Now the CX will try do request image from IP address

192.16.18.123

Warning

The CX90x0 is still working to initialize the flash ! DO NOT POWER DOWN THE CX90x0 !

Wait until CX90x0 PWR led is BLUE or GREEN again: The device will reboot after

it has finished update!

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 60 61

Sin comentarios

Beckhoff CX9000 Manual de usuario Pagina 54